fuseholders fpg7 www.schurter.com/pg0 2 fuses shock-safe fuseholder, 5 x 20 mm, horizontal, slot/fingergrip, smd, iec 60335-1 fingergrip 250 vac 2.5 w / 10 a (vde)16 a (ul/csa) description - surface mount device - meets the new requirements of iec 60335-1 ed. 4.0 for appliances in unattended use (clause 30.2.3). this includes the enhanced re - quirements of glow wire tests acc. to iec 60695-2-11 to -13. order number: 3101.0071 / 3101.0076 - cap is available slotted or fingergrip standards - iec 60127-6 - ul 4248-1 / ul 512 - csa c22.2 no. 39 approvals - vde license number: 129098 - ul file number: e39328 applications - industrial electronic - household appliances - medical equipments references general product informatio n packaging detail s weblinks approval s , roh s , china-roh s , e-stor e , distributor-stock-chec k , accessorie s , product change notification (pcn ) technical data shocksafe category pc2 fuse-link 5 x 20 mm mounting pcb terminal solder smt rated voltage 250 vac rated current 10 a (vde), 16 a (ul/csa) rated power acceptance iec 2.5 w / 10 a @ ta 23 c admissible power acceptance at hig - her ambient temperature see derating curves degree of protection ip 40 protection class suitable for appliances with protection class 1 or 2 acc. to iec 61140 admissible ambient air temp. -40 c to 85 c climatic category 40/085/21 acc. to iec 60068-1 material: socket thermoplastic, black, ul 94v-0 material: terminals tin-plated copper alloy unit weight (socket/cap) 4.4 g storage conditions 0 c to 60 c, max. 70% r.h. product marking , type, voltage, power acc./current rating, approvals soldering methods reflow solderability 245 c / 3 sec acc. to iec 60068-2-58, test td resistance to soldering heat 260 c / 20 - 40 sec acc. to ipc/jedec j-std-020d contact resistance < 5 m at 20 mv dielectric strength > 3 kv between l-n (50 hz; 1 min) impulse withstand voltage > 2.5 kv between l-n insulation resistance > 10 m between l-n (500 vdc; 1 min) overvoltage category i - ii acc. to iec 60664-1 pollution degree 1 - 3 acc. to iec 60664-1 resistance to vibration acc. to iec 60068-2-6, test fc
2 fuseholders fpg7 www.schurter.com/pg0 2 fuses abmessungen 32 mm 1.8 ? 12.5 ? 11.1 1.5 ? 5 8 0 . 5 1 . 1 .14 4 14.1 7.85 6 . 7 2.7 1 5 7 . 1 11 8 5.5 32.1 6 variant 3101.0070 ? 12.5 ? 11.1 1.5 ? 8 0 . 5 1 . 1 .14 4 14.1 7.85 6 . 7 2.7 1 5 7 . 1 5.5 32.1 4 37 5 11 8 variant 3101.0075 17.5 5.5 3.5 1.5 5.5 soldering pads derating curves for fuseholders admissible power acceptance in watt 1.5 1.0 0.5 0.0 2.5 2.0 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n ambient air temperature ta c variants holder cap material reflow condition remark order number l slot knob thermoplastic - will be replaced by 3101.0071 3101.0070 l slot knob spec. thermoplastic 2 acc. to jedec j-std-020c, tp=260 +0/-5 c, tp = 20-40 s approvals pending 3101.0071 l fingergrip thermoplastic - will be replaced by 3101.0076 3101.0075 l fingergrip spec. thermoplastic 2 acc. to jedec j-std-020c, tp=260 +0/-5 c, tp = 20-40 s approvals pending 3101.0076 spec. thermoplastic meet the new requirements of iec 60335-1 ed. 4.0 for appliances in unattended use (clause 30.2.3). this includes the enhanced require - ments of glow wire tests acc. to iec 60695-2-11 to -13. packaging unit xxxx.xxxx.d2 blister tape 38 cm reel (250 pcs.) the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
